|
|
Build Your Online Product Catalogs?
| Product Name: |
INA crossed roller bearing XSU series
|
| Supply Ability: |
10000 |
| Related proudcts |
roller bearing, robotic arm, crossed bearing, |
| Specifications |
ina standard |
| Price Term: |
FOB |
| Port of loading: |
Shanghai |
| Minimum Order |
10 |
| Unit Price: |
1 |
|
the main feature of the bearings are:
1.receiving loads from all direction 2.hig rigidity 3.high rotation accuracy
different models of this type:
XSU080168. XSU080188. XSU080218. XSU080258. XSU080318. XSU080398.
XSU140414. XSU140544. XSU140644. XSU140744. XSU140844. XSU140944.
Our products are good in quality, competitive in price and also complete in size. Looking forward to cooperate with you
C. Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.Â
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small ***ces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
D. Product Application
•Industrial Robotic arm,Reducer drive
•Percision Turntable,NC rotary table
•Rotation part of Machine tools
•Inspection instrument,Medical equipment
•Aero&Aviation equipment,Military radar etc
E. Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80â„?. If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all |
| Company: |
Luoyang Boying Bearing Co.,Ltd
|
| Contact: |
Mr. Yang Liu |
| Address: |
Yingzhuang industrial park wangchaoling |
| Postcode: |
471000 |
| Tel: |
86-0379-62275175 |
| Fax: |
86-0379-62275812 |
| E-mail: |
|
|
|
|
Home
