|
|
Build Your Online Product Catalogs?
| Product Name: |
TIMKEN crossed tapered roller bearing XR,JXR serie
|
| Supply Ability: |
10000 |
| Related proudcts |
taper roller bearing, slewing bearing, crossed bearing, |
| Specifications |
timken standard |
| Price Term: |
FOB |
| Port of loading: |
Shanghai |
| Minimum Order |
5 |
| Unit Price: |
10 |
|
1. characters : high rotation accuracy / high precision / easy to handle
2.TIMKEN standard / stock / wholesale
3.different models of this type:
XR496051. XR678052. XR766051. XR820060. XR855053. XR882055. XR889058. XR897051. JXR637050. JXR65250. JXR699050 .etc
4.good-after service
C. Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.Â
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small ***ces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
D. Product Application
•Industrial Robotic arm,Reducer drive
•Percision Turntable,NC rotary table
•Rotation part of Machine tools
•Inspection instrument,Medical equipment
•Aero&Aviation equipment,Military radar etc
E. Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80â„?. If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite se |
| Company: |
Luoyang Boying Bearing Co.,Ltd
|
| Contact: |
Mr. Yang Liu |
| Address: |
Yingzhuang industrial park wangchaoling |
| Postcode: |
471000 |
| Tel: |
86-0379-62275175 |
| Fax: |
86-0379-62275812 |
| E-mail: |
|
|
|
|
Home
